JonEng
Well-known member
Not much info on the link - call me lazy, but is there any more available?
Not much info on the link - call me lazy, but is there any more available?
jimbo, i agree with scaffy (even the idiots touch) but if you have kids working for you that are as thick as dungeon walls, ask apollo to provide the free training, it only takes half a day i think? but well worth it.
Excalibers straight thru the holes in the back of a band and plate,realy fast and strong,and a few testers at ground level,depending how many ties are required overall,and your pull test is done in a minute,takes longer to fill the tags and paperwork in
We are using a 12mm bit and yes I'd love to try a 13mm bit but a bit unsure where that will leave me in the event of failure. I have been in touch with supplier who has promised to get back to me but if no one else is having problems that means it's either something we are doing or they can't handle granite. What they did say was in soft brick use an 11mm bit so you would think in harder surfaces you could use a slightly bigger bit.
Seen pictures of a fair size job on here with the beams sitting on this arrangement, never done it myself but it may provide a solution to a problem job we may get. I know an engineer would be required to provide the exact set up but would he put any additional requirements on the job or would you be happy to land beams on to this arrangement then build a couple of lifts on it?