Alloy tower (1 Viewer)

Jase222

Active member
Joined
Nov 21, 2013
Messages
25
Reaction score
0
Hi
Does anyone know what the ty spacing are for a alloy tower when you can't use stabilsers, think it's every 4m, haven't done a tower for years and need to start Monday tried contacting boss and total waste of time.
Cheers
 
Hi thanks did have a look and it was ok if you have the rakers, so in the end I phoned them and they are the most non comital people on the planet ,anyway eventually
they said 2m from floor to 1st tie and then every 4m and max gap between tower and structure 175mm and you don't need inside guard rail.
And I got it in writing !
 
Hi thanks did have a look and it was ok if you have the rakers, so in the end I phoned them and they are the most non comital people on the planet ,anyway eventually
they said 2m from floor to 1st tie and then every 4m and max gap between tower and structure 175mm and you don't need inside guard rail.
And I got it in writing !

Oh you got it in writing!

You cannot discharge your legal responsibilities, because some clueless muppet gave you bad advice about something totally irrelevant!
 
Top Bottom