PDA

View Full Version : Mono Pitch Temp Roof



celtic
15th December 2011, 12:39 AM
We are looking at a 33m long x 16m wide x 11m high on one side and 9m on the other scaffold structure, K Stage for a paint and blast encapsulation.

using X Beams for span, spaced every 2m, top and bottom chord at 1m, plan braced every 5 bays knee braced every 2m as per standard would be our way

Fully sheeted with a 9m opening at one end.

local eng has thrown in a million braces especially plan braces in roof.

we are in Australia and proper designers are rare.

Any ideas/generic designs that are like this????

Celtic

philliosmaximus
15th December 2011, 07:15 AM
Celtic stick to the design mate , i know it sometimes seems over the top but it is their neck on the block if something goes wrong , dont think there is such a thing as a Generic Temporary roof as there are so many variables from job to job .But for what its worth sounds to me like you put a good roof up without the design :)

john apollo
15th December 2011, 08:31 AM
damian back in the yard just had a look at the drawing i aint never seen as much plan brace . as alan sorted it for you
john

mick shaw
16th December 2011, 05:05 PM
invest in haki woods and pearlings not as much braceing

john apollo
16th December 2011, 05:28 PM
2011 and were nailing plastic sheet to wood tidy.

aom
16th December 2011, 05:41 PM
If you think that's bad wait till you see what we've got planned for 2012.:eek:

Alan Reade
17th December 2011, 05:52 AM
We are looking at a 33m long x 16m wide x 11m high on one side and 9m on the other scaffold structure, K Stage for a paint and blast encapsulation.

using X Beams for span, spaced every 2m, top and bottom chord at 1m, plan braced every 5 bays knee braced every 2m as per standard would be our way

Fully sheeted with a 9m opening at one end.

local eng has thrown in a million braces especially plan braces in roof.

we are in Australia and proper designers are rare.

Any ideas/generic designs that are like this????

Celtic



Give this guy a call he is a sound Engineer in Oz and if he cannot help he may point you in the right direction
Andrew Dobinson
0061433052566

Regards
Alan

daftscaff
17th December 2011, 11:18 PM
al your class in a glass NICE ONE

celtic
19th December 2011, 02:23 AM
We are following clients eng drawings, i will post pics when finished.

Design is absolute w* nk.

Celtic

aom
19th December 2011, 12:52 PM
Looking forward to seeing the pictures Celtic.