outward bound
Well-known member
- Joined
- Apr 23, 2010
- Messages
- 304
- Reaction score
- 0
hi -
check fittings have always been classed as being able to double slippage on load bearing fittings i.e 12.2 kN when used with class A DOUBLES.
in the bs1139 and EN74 it sets out the testing limits but I have not seen info in there on check fittings ...
if this is the case the should this information come from the manufacturer of the double?
cheers OW
check fittings have always been classed as being able to double slippage on load bearing fittings i.e 12.2 kN when used with class A DOUBLES.
in the bs1139 and EN74 it sets out the testing limits but I have not seen info in there on check fittings ...
if this is the case the should this information come from the manufacturer of the double?
cheers OW